close
Fluoropolymer Products
& Applications

- LOW MELTING ETFE PELLET

ETFE-LM PELLET LOW MELTING ETFE PELLET

–THE SUPERIOR MATERIAL CHOICE FOR ETFE WIRE AND CABLE INSULATION

ABOUT DASFLON™ LOW MELTING ETFE PELLET

DASFLON™ LOW MELTING ETFE PELLET is produced from a modified ETFE polymer. it is different than most of ther ETFE materials in that it has a lower melting point of 225ºC VS 260ºC for most ETFE. It has the below advantages compared to most conventional ETFE. By using our our ETFE-LM, you can achieve the following results.

General characteristics

  • Better processibility and surface finish

  • Better chemical resistance and thermal stability

  • Improved optical clarity

  • Higher limiting oxygen index (40% vs 31%)

  • Lower melting point with improved heat resistance

  • Higher continuous service temperature

* Continuous usage temperature
( DASFLON™ LOW MELTING ETFE PELLET : 180ºC VS OTHER ETFE RESIN : 150ºC )

EXPANDED ADVANTAGES

  • Melt Flow Adjustment We offer customization to meet your specific Melt Flow Rate (MFR). Whether it is your exact target or a close approximation, we will ensure you receive the MFR you need.

  • Micro Pellet Availability For precise feeding in small extruders, we recommend using our smaller-sized ETFE-LM pellets, available in diameters ranging from 0.8mm to 2.0mm.

  • RTU (Ready-to-Use) Colored Pellets Customization options for our ready-to-use colored pellets are available and can be tailored through further discussion with customers.

  • Custom compounding We offer high-level fluoropolymer compounding service using our advanced dispersing technologies, Please contact us for more details.

The table below outlines the physical properties of our standard grades

Thermal and mechanical
Property Test Method Units TR-10 TR-20 TR-30
Melt Flow Rate ASTM D-3159 g/10 min 15 20 30
Melting Point ASTM D-3418 DSC ℃ - 225 ℃ -
Elongation ASTM D-3159 % 380 380 380
Tensile Strength ASTM D-3159 Mpa 43 43 43

* If you require specific MFR, Please don't hesitate to contact us.

Application

  • DASFLON™TRL-10 : WIRE ,CABLE, INJECTION MOLDED PARTS AND TUBING

  • DASFLON™TRL-20 : WIRE, CABLE , INJECTION MOLDED PARTS AND TUBING

  • DASFLON™TRL-30 : WIRE, CABLE, INJECTION MOLDED PARTS AND TUBING

Packaging

25kgs (55 lbs) paper bag (inner sealed plastic layers shielded by three paper layers)
Gaylord box : 500kg (1102 lbs), 1000kg(2204 lbs)